Sigma 3-16K - Page 46

Operating Manual SIGMA 3-16K, page 46 of 69
03/06
4.2.3 Standard Time Mode
For the standard time mode the time is set in minutes. Active “set“ in the time
area with the left knob. Enter the time by turning the right knob (the display shows
“min“).
This total run time (max. 30 minutes) is displayed by a sequence of bars before
starting the centrifuge.
During centrifugation this time is counted down, the sequence of bars indicates
the remaining run time. The set time is indicated by one single bar.
The centrifuge run can be early terminated by pressing the stop-key. The set time
and the remaining run time remain on the display.