Sigma 3-16K - Page 53

Operating Manual SIGMA 3-16K, page 53 of 69
03/06
11. Please pay attention to the max. speed. At speeds over 4 000 rpm there is an
increased breaking glass hazard.
12. Fill vessels carefully to same weight. Imbalances would result in increased
wear of bearings.
13. Use perfect accessories only.
14. Avoid corrosion to accessories by careful maintenance.
15. Spin infectious material in sealed rotors and buckets only.
16. Do not spin explosive or highly imflammable materials.
17. When centrifuging substances with a density > 1,2 g/cm
3
the allowable max.
speed must be reduced (refer to chapter 7.1.2 "Density").
18. Grease joints of buckets and rotor pins in swing-out rotors.