Sigma 980 - Alarms Flow Chart

Page 152
980 Quick-Start Guides
Appendix F
980 Alarms Flow Chart
Main Menu
Options
Advanced Options
Alarms
Pick one.
Pick one.
Pick one.
Enable
or Disable.
Set
Trigger Point.
Enable
or Disable.
Select
Set
Deadband.
Set high
Trigger Point.
Set
Time Interval.
Report via Modem
Set Relay #1
Set Relay #2
Set Relay #3
Set Relay #4
Memory Battery Level
Flow Rate of Change
Rainfall
Modem Failure Flow
U-Sonic Echo Loss pH / mV
X-ducer Ringing Temperature
U-Sonic Failure Channel 1
RS-485 Timed Out Channel 2
Channel 3
Channel 4
Channel 5
Channel 6
Channel 7