Sigma BC 12.12 - Introduction to the Bike Computer; Initial Use

2
Contents
1. Introduction to the BC 12.12 / BC 12.12 STS 02
1.1 Initial use 02
1.2 Navigation principle 03
1.3 Set-up 04
2. Functions / Properties 04
2.1 General 04
2.2 Special functions 05
2.3 STS features 06
3. Settings / Deletion 08
3.1 Settings 08
3.2 Determining the wheel size 08
3.3 Deleting the functions 08
4. Important Notes / Troubleshooting 09
4.1 Technical data 09
5. Warranty Conditions 11
GB
1. Introduction to the BC 12.12 / BC 12.12 STSENGLISH
You can find the CE declaration under:
www.sigmasport.com
1.1 Initial use
The bike computer comes in “deep sleep mode”.
To exit this mode, press and hold the MODE 1 and
SET buttons for five seconds.
On waking up, the bike computer
will be in active mode.
To access the settings,
press the SET button.