6
2.3 STS features
– Synchronization Attach the BC 12.12 STS to the
bracket – zeros flash for the speed.
There are two ways of synchronizing the speed:
– 1. Start cycling – the receiver usually
synchronizes with the transmitter after 3-4 wheel
rotations.
– 2. Spin the front wheel until the speed values
stop flashing.
Removing the BC 12.12 STS from the bracket
severs the connection.
– Trip Section Counter (TS) This is a separate
distance / time counter that is manually started and
stopped. The trip section counter makes it possible
to evaluate a trip section or interval training session
without influencing the total values for the trip.
2. Functions / Properties
1 2
To Next Page
Loading...
