Page 50
Troubleshooting
Important information, troubleshooting, and FAQ
www.sigmasport.com ROX 10.0
ROX 10.0
11.2 Troubleshooting
No speed displayed via the ANT+ speed transmitter
− Have you checked the distance between the magnet and the ANT+ speed
transmitter (max. 12 mm)? If the selected distance is not correct, the
transmitter flashes the first 10 times on magnet contact.
− Do you have both the ANT+ speed transmitter and the magnet?
− Have you checked whether the magnet is magnetized?
− Has the ANT+ speed transmitter been paired with the ROX 10.0 GPS?
(See section ’‘10.3 Bike 1–3 & totals’‘)
− Have you checked the ANT+ speed transmitter’s battery status? To do so,
press the button on the transmitter and check if the LED illuminates.
No speed displayed via the GPS signal
− You can switch off the GPS function under the menu path ‘Settings/GPS
Settings’. Is it switched on?
− Are you outdoors?
− Does your ROX 10.0 GPS have satellite connection? (See section ’‘8.2
GPS signal’‘). Please note that it can initially take a short while (approx. one
minute) for a valid GPS signal to be received.
No cadence displayed
− Have you checked the distance between the magnet and the ANT+ cadence
transmitter (max. 12 mm)? If the selected distance is not correct, the
transmitter flashes the first 10 times on magnet contact.
− Do you have both the ANT+ cadence transmitter and the magnet?
− Have you checked whether the magnet is magnetized?
− Has the ANT+ cadence transmitter been paired with the ROX 10.0 GPS?
(See section ’‘10.3 Bike 1–3 & totals’‘)
− Have you checked the ANT+ cadence transmitter’s battery status?
No heart rate displayed
− Are the electrodes damp enough?
− Is the ANT+ heart rate transmitter correctly positioned against your body?
− Has the ANT+ heart rate transmitter been paired with the ROX 10.0 GPS?
− Have you checked the ANT+ heart rate transmitter’s battery status?
Display blank
− Have you checked the ROX 10.0 GPS’s charge status?
− Is the battery charged?
− Is the ROX 10.0 GPS switched on?