Depending on the film speed and temperature, legibility of the printed data
may vary.
If the D
ata Back LCD becomes light and difficult to read, please replace the
battery in the data back.
The SA-5 camera has many features. This part describes the basic camera operation using Full Automatic
Mode "*" and the functions you can use in this mode.
TAKING A PICTURE BY THE * MODE
The "*" mode is full automatic operation mode. The camera will automatically control the focus, the exposure
and the film advance.
1. Set the mode dial to the "*" position while
pressing the lock button.
2. Set the lens switch to the AF position.
To avoid damaging the AF mechanism, please do
not turn the focus ring manually while in the AF
mode.
To Next Page
Loading...
