FILM TRANSPORT
1) Film loading: Automatically advances to 1 st frame
2) Film wind: Automatic advance by built-in motor
3) Winding mode: Single and continuous mode, Approx. 3 frames/sec. (continuous mode)
4) Film rewind: Auto rewinding starts at end of the film by built-in motor
BUILT-IN FLASH
1) Type: Built-in, retractable TTL auto flash
2) Guide Number: 11 (ISO 100/meter)
3) Coverage Angle: Covers 28 mm lens angle of view
4) Others: Red-eye reduction
Daylight Synchronization
Slow Synchronization
POWER SOURCE
1) Battery: One, 6 V lithium battery, Type 2CR5 4www.butkus.org
2) Battery check: Indicator on the LCD panel
OTHERS
1) External flash: Hot-Shoe with Sigma dedicated contacts
2) Back cover: Fixed type with data back module
3) Remote control: By optional remote controller RS-21 and RS-11
4) Mirror up: Possible
5) Preview: By pressing the button
6) LCD illumination: For about 6 seconds after pressing the illumination button
DIMENSIONS
1) WxHxD: 147.1x94.9x65.4 (mm)
2) Weight: 445 9 (without battery)
To Previous Page
Loading...
