TAURO 35-35PLUS-40-40PLUS
9. Machine identification
There is a plate on the machine casing, like the one illustrated, which carries indications concerning the
manufacturer, type of machine, serial number, electrical features, frequency, rated power, number of phases, year
of manufacture and mass.
9.1. Main components
• Raw materials used: the machine is almost completely made of steel, cast iron, brass and plastic. All of these
components can be easily disposed of and are not dangerous to the environment and/or a hazard to personal
safety. Adequately separate the different materials for subsequent reuse or separate disposal.
• Surface treatment: paint, electrolytic galvanising, chemical nickel-plating, Teflon coating, electro polishing, to
ensure high technical performance, hygiene and durability.
• The Sigma packages fully meet the requirements of Directive 94/62/EC and Legislative Decree 05/02/97 no. 22
(and subsequent amendments and additions) and so become waste similar to urban, that can be easily
inserted in any separate collection program.
To Next Page
Loading...
