Silent Gliss 9021 - Intended Application

Page 4
Usermanual Motors 902x_903x
1 Introduction and Product Overview
This User Manual describes the setting up and programming of the
different motor types, which are used in connection with the Silent
Gliss Electrical Curtain Track System SG 5400 and SG 5420 as well as
with the Radio Remote Control System SG 9940. Please refer to the
separate tting instructions and wiring diagrams for the installation of
the Systems SG 5400 and 5420.
This User Manual applies to following Silent Gliss motor variations:
2 Intended Application
The motors mentioned in Chapter 1 may only be used in combination
with the designated Silent Gliss Systems.
The motor is solely designed for indoor use. Application in wet areas
like bathrooms, indoor swimming-pools, saunas etc. is not permitted.
Please note that Radio Control Systems are not permitted in certain
locations such as Hospitals and Airports.
Please ensure that other equipment is not being controlled by radio
equipment using the same frequency.
9020
9021
9021
9022
9023
SG Nr.
9023
9030
9031
9031
9032
9033
9033
ERP Nr.
100902000
100902101
100902102
100902200
100902301
100902302
100903000
100903101
100903102
100903200
100903301
100903302
Long description
Motor 90-250V AC*
Motor 90-250V AC*,radio 868MHz
Motor 90-250V AC*,radio 915MHz
Motor 90-250V AC*,manual override
Motor 90-250V AC*,radio 868MHz, manual override
Motor 90-250V AC*,radio 915MHz, manual override
Motor 24V DC
Motor 24V DC, radio 868MHz
Motor 24V DC, radio 915MHz
Motor 24V DC, manual override
Motor 24V DC, radio 868MHz, manual override
Motor
*260V AC CB
24V DC, radio 915MHz, manual override
Short description
on motor
9020.000.00
9021.868.00
9021.915.00
9022.000.MO
9023.868.MO
9023.915.MO
9030.000.00
9031.868.00
9031.915.00
9032.000.MO
9033.868.MO
9033.915.MO