Silent Gliss 9021 - Safety Instructions

Usermanual Motors 902x_903x Page 5
3 Safety Instructions
The Motor may be used only in dry rooms.
The Motor may not be used in explosive areas.
The Motor is not intended for use by young childrens or inrm
persons without supervision.
Only original Silent Gliss parts may be used.
The installation, inspection and troubleshooting of the drive mecha-
nism may only be performed by qualied specialists. Please consider
the country specic regulations in regards of connection of the motors
to the mains.
The proper operation of the motor in combination with the Electric
Curtain Track Systems is only guaranteed with professional installati-
on, xing, as well as sufcient electric power supply.
Cleaning of the motor may only be performed if the motor is discon-
nected from the mains voltage.
The motor must not be used if cables, plugs, or the motor are
damaged.
Please ensure the specication detailed below and in the declaration
of conformity (page 20) conform with the necessary regulations in the
intended country of use and the radio frequency is approved for that
country.
4 Technical Specications
Technical data for motors only. For the technical data for the entire
curtain track system refer to the corresponding Assembling- / Fitting
Instruction.
9020-9023 9030-9033
Voltage Supply
Frequency
Current
Frequency of radio control
(only for 9021/9023/9031/9033)
90 - 250V AC**
50 - 6 0 Hz
0.5 - 1 A
868 or 915 MHz*
24 V DC
--
2.5 A
868 or 915 MHz*
Speed
Noise level
Dimension
Max. drapery weight
Weight
110 rpm
< 45 dBA (30cm)
240 x 90 x 60mm
1kg
110 rpm
< 45 dBA (30cm)
240 x 90 x 60mm
1kg
44kg / 97lbs 44kg / 97lbs
Temperature ranges:
For operation
Storage
Safety class
*(depending
**260V AC CB
on regulation of respective country)
0 C to + 60 C
-20 C to + 70 C
IP40
0 C to + 60 C
-20 C to + 70 C
IP40