Need help?Do you have a question about the Silent Sentinel Jaeger and is the answer not in the manual?
Essential safety guidelines and notes for proper installation and operation.
General description of the Jaeger PT system components.
Details on voltage input and power draw for the Jaeger PT unit.
Illustrates the front, back, and payload orientation of the Jaeger PT unit.
Outlines the sequence for system installation.
Lists and describes the hardware provided for the Jaeger System installation.
Step-by-step instructions for securely mounting the PT unit to the mast.
Procedure for attaching the top mount device to the PT unit.
Detailed steps for attaching side payloads to the Jaeger PT unit.
Introduction to installing the wiper assembly on the camera housing.
Lists components and hardware for the wiper assembly installation.
Explanation of factory boresighting and adjustment procedure.
Steps to adjust the horizontal alignment of the camera.
Steps to adjust the vertical alignment of the camera.
Lists and describes the components included in the galvanic kit.
Description of Jaeger cable types and formats.
Detailed pin assignments for network and multiway cable conductors.
Pin assignments and contact details for the Jaeger Base Connector (IL38K).
Pin assignments for the side payload MIL-D38999 G39 connector.
Pin assignments for the top payload MIL-D38999 G39 connector.
General| Frame Rate | 30 Hz |
|---|---|
| Thermal Sensitivity | <50 mK |
| Spectral Range | 8-14 μm |
| Operating Temperature | +55°C |
| Detector Type | Uncooled microbolometer |
| Power | 24V |
| Digital Zoom | 4x |
| Storage Temperature | +70°C |
| Resolution | 640x480 |
To Next Page