16"
"
SOOTHING PHASE PROGRAMS
The Soothing phase key on the front screen is used to select “Cata” or “Ana”.
CONNECTING ELECTRODES
Note: The POLARITY of the DC current is pre-set, inside the unit, by a relay. Therefore, there is
no need to modify connection of the electrodes when switching between “Cata” and “Ana”.
Default treatment time is 3 minutes. DC current intensity can be increased or decreased by
1/10
th
of a mA (milliamp) increment. Pressing the “On” key will start the treatment. The
treatment will stop when the increment chronometer reaches the pre-set time. To start a new
treatment, the user will have to exit this screen or increase the set time. The unit will not allow
the time to restart if the limit has been reached.
To Next Page
Loading...