- 5 -
Control panel
Display
Display for
a
selection of the weight
(750 g, 1000 g, 1250 g)
b
the remaining baking time in minutes and
the programmed time
c
the selected level of browning (light ,
medium , dark , Rapid )
d
the selected program number
e
the programme sequence
f
the addition of ingredients („ADD“)
Start / Stop
To start and stop an operation or to delete a
time-programming.
f
a
dc
b
e
To interrupt the operation, briefly press the Start/Stop
button until a signal tone sounds and the time in
the display flashes. By once again pressing the
Start/Stop button within 10 minutes, the opera-
tion can be continued. Should you forget to re-start
the programme, after 10 minutes it will be automa-
tically continued.
To completely terminate the operation or to delete
a programming, press the Start/Stop button for
3 seconds, until long signal tone sounds.
Note:
Do not press the Start/Stop button if you want
to simply check the condition of the bread. You
can watch the baking operation through the vie-
wing window.
Please note:
When pressing all buttons an acoustic signal must
be audible, unless the appliance is in operation.
Level of browning (or Rapid modus)
Select the browning level or switch into the Rapid
modus (light/medium/dark/Rapid). Press the
Browning Level button repeatedly, until the
arrow is located above the desired browning level.
For the Programmes 1 - 4 you can, through repea-
ted pressing of the Browning Level button ,
activate the Rapid modus to shorten the baking
process. Press the Browning Level button
repeatedly until the arrow appears over "Rapid". A
browning level cannot be selected with the
programmes 6, 7 and 11.
Timer
▼ ▲
Time-delayed baking.
Note:
Time-delayed baking cannot be arranged with
Programme 11.
To Next Page
Loading...
Need help?
General
