31
Handling and operation
MP3/CD Car Radio KH 2382
GB
Recording
Place a memory medium into the card slot or connect a data carrier to the
USB port.
Insert the CD, if necessary, and/or switch on the external audio device.
With the MD/LD button set the desired oper
ations mode (CD, Radio,
AUX).
If necessary start playback of the external audio device.
Hold down the button SCN/REC until RE
C MMC
or REC USB is displayed.
In the operation mode CD, MMC ALL or USB ALL will be displayed. If no
data carrier is connected, on which recordings can be made NO MEDIA
will be displayed.
Press repeatedly the button
SCN/REC until the desired r
ecording option is
displayed. When recording an audio CD you can make an additional setting
depending on whether you want to record all titles from the CD (USB/MMC
ALL) or only the current title (USB/MMC ONE).
Start recording by pressing the
BND/ENT button.
The audio data is now sav
ed on the data carrier in the format that was set (MP3
or WMA). At the beginning of the recording the notice RECORD appears in the
display. After that the recording is characterized by a prefi xed "R".
NOTICE
When the selected data carrier is full recording automatically moves to the ►
other data carrier as long as a corresponding data carrier is connected.
To stop the r
ecording press briefl y the
BND/ENT button once more. Af
ter
which WAIT is shown briefl y in the display, the recording is saved.
Copying data from an MP3 CD
You can copy individual titles from an MP3 CD to an external USB data carrier or
an SD/MMC memory card.
Place a memory medium into the card slot or connect a data carrier to the
USB port.
During playback of a title from an MP3 CD hold down the SCN/REC
button. The notice COP
Y MMC and/or COPY USB appears. If no data
carrier is connected, on which recordings can be made NO MEDIA will
be displayed.
To Next Page
Loading...
Need help?
General
