18
Installation
MP3/CD Car Radio KH 2382
GB
If necessary secure your device against theft with additional measures.
Attach the securing screw with the anchoring plate
64
and the securing material
to the engine fi rewall of the vehicle.
Carefully push the device into the mounting duct until it locks into place.
After all connections have been made activate the RESET button with a ball
point pen or other pointed object.
Attach the face plate as described under "Installing the face plate".
IMPORTANT
Possible damage to the cable!
Observ
e the position of the cable when sliding the device into the duct so
►
as to avoid damaging it.
Finally put on the bez
el frame.
Uninstalling the device
To remove the installed device proceed as follows:
Remove the bezel frame
61
.
Insert the right and left keys
63
into their respective slots on the sides of the
device. (The tabs are now bent back.)
Pull the device out.
To Next Page
Loading...
