30 GB/IE
Configuring users
The weighing scales are able to save measurements
from up to 8 different users. Upon starting a new
measurement, the diagnostic scales will automati-
cally assign the measurement to the created user if
the last saved measurement was within +/- 3kg of
the current value.
For two or more possibly recognised users, the user
changes in the display. Select your user by pressing
the SET button
3
.
Transferring assigned
measurements
If the “HealthForYou“ app is open and actively
connected via Bluetooth
®
to the diagnostic scales
(indicated by the Bluetooth
®
symbol
21
in the LC-
display
1
), newly assigned measurements will be
immediately transferred to the app. The synchroni-
sation symbol
20
appears in the LC-display
1
when new measurements are being transferred to
the app. It does not appear if no new measurements
were saved or recorded for this user. In this case
the values will not be saved to the diagnostic scales.
If the app is not open, newly assigned values will
be saved to the diagnostic scales. The diagnostic
scales can save up to 30 values per user. The saved
values are automatically transferred to the app af-
ter opening the app within Bluetooth
®
range. Data
can automatically be transferred with the diagnos-
tics scales off, provided you are within Bluetooth
®
range.
Retrieving saved measure-
ments from the scales
When the product is switched on, select the
user by pressing the
button
4
as many
times as necessary. The selected user is
activated after approx. 3 seconds.
Press the button
2
as many times as
necessary to retrieve past values.
Measurements that have already been trans-
ferred can no longer be viewed on the
LC-display
1
.
Deleting scales data
To completely delete all values and outdated
user data from the diagnostic scales, switch on
the diagnostic scales and hold the Mode
button
5
for approx. 11 seconds.
The LC-display
1
will read “CLr“ for a few
seconds.
To delete just one user, switch the diagnostic
scales on and press the
button
4
to select
the user. This will be activated after approx.
3 seconds and the user‘s initials along with
“0.0“ will appear in the LC-display
1
. Then
press the Mode button
5
for approx. 6 sec-
onds. The LC-display
1
will read “dEL“ for a
few seconds.
Evaluating results
Body Mass Index (BMI)
The body mass index (BMI) is a number frequently
used to assess body weight. The number is calcu-
lated from the body weight and height: body mass
index = body weight ÷ height
2
. The unit of measure
for the BMI is therefore [kg/m
2
]. For adults (20 years
and up), the BMI is then rated as:
Category BMI
Underweight Very severely
underweight
Moderately
underweight
Slightly
underweight
<16
16-16.9
17-18.4
Normal weight 18.5-24.9
Overweight Overweight 25-29.9
Obese (over-
weight)
Obese class I
Obese class II
Obese class III
30-34.9
35-39.9
≥ 40
To Next Page
Loading...
