Silvercrest SBMS D30 B1 - Play control; Intro playback; Select repeat play options; Repeat A-B

34 GB/IE
 Play control
Button Description
28
Press button to stop playing.
The display shows the number of
tracks on the CD. TO11 indicates the
CD has 11 tracks.
In USB mode, the total number of
tracks is also displayed.
15
Press button to pause playback.
42
15
Press button to resume playback.
42
/
29
Press button to skip to the
previous / next track.
/
27
Press and hold button to perform fast
forward / reverse playback.
Release the button to resume normal
playback.
 Press ALBUM / PRESET
/
27
to
skip to the previous / next album (only for
MP3 / WMA disc and USB).
 Show playback times
(audio CD)
Press INFO
26
while playing a music CD to:
 The remaining term of the title,
 The current time on the CD,
 The remaining term of the CD.
 Random playback
 During music playback, press SHUFFLE
37
repeatedly to select a shuffle option play
mode. The selected mode will show on the
display:
Display Description
SHUF FLE
After all the tracks have been
played once, the playback will
stop automatically.
SHUF OFF
Normal playback will resume.
 Intro playback
 During music playback, press INTRO
23
.
The product will play the first 10 seconds of
each track. Press INTRO again to resume
normal playback.
 Select repeat play options
 During music playback, press REPEAT
24
repeatedly to select repeat play modes. The
selected mode will show on the display.
Display Description
RPT ONE
Repeat current track.
RPT ALB
Repeat the track in the folder
(if a folder is displayed).
RPT ALL
Repeat all tracks.
RPT OFF
Repeat turned off.
 Repeat A–B
 During music playback, press A–B
36
at
the start point.
 Press A–B
36
again at the end point.
 The selected section starts to play
repeatedly.
 Cancel repeat play: Press A–B
36
again.
NOTE: The section A and B can be set only
within the same track / title.
 Program
The user can program up to 20 tracks in CD / USB
mode in any desired order. If more than 20 tracks
are stored, FULL appears in the display.
 Press
28
.
 Press PROG
10
to enter MEMORY mode.
 Press numeric buttons 0 to 9
31
or /
29
to select the track that you want to
preset. Press PROG
10
to confirm. Repeat
this step to program more tracks.
 Playback program tracks: Press
15
or
42
. Each activated state will be cleared
if no buttons are pressed within 20 seconds
or if
28
is pressed.
NOTE: Deleting the program: Press
28
twice. PRG CLR appears in the display.