EasyManua.ls Logo

Silvercrest SBMS D30 B1 - Cleaning; Troubleshooting; No power; Remote control does not work

Silvercrest SBMS D30 B1
138 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
38 GB/IE
reposition the unit. The display will show a slide
bar to indicate the signal strength, the stronger the
signal, the longer the bar will be from left to right.
Bit Rate / Codec / Channels
The display will show the digital audio bit rate
being received with additional information about
the audio codec and channel configuration.
Time
The broadcaster (Radio station) provides clock
information automatically.
Date
This displays the current date provided
automatically by the broadcaster.
Cleaning
Before cleaning: Switch the product off and
remove all plugs!
No acid, chafing or solvent cleaning agents
should be used or the product can be
damaged.
Only clean the outside of the product using
a soft, dry cloth!
For persistent soiling, a mild cleaning agent
can be used.
Storage when not in use
Store the product in a dry location to protect it
from dust and direct sunlight.
Before storing the product: Remove the batteries.
Store the product in its original packaging.
Troubleshooting
To keep the warranty valid, never try to repair the product yourself. If you encounter problems when
using this product, check the following points before requesting service.
Problem Cause / Solution
No power
Ensure that the power cord
46
is properly connected.
Ensure that there is power at the AC outlet.
Press
6
/
20
to turn the product on.
Remote control does not
work
Before you press any playback control button: Select the
correct audio source.
Reduce the distance between the remote control and the
product.
Insert the batteries with their polarities (+/) aligned correctly.
Replace the batteries.
Aim the remote control directly at the sensor (the sensor is
located on the front of the main unit).
No response from the
product
Disconnect and reconnect the power plug
46
. Turn the
product on again.
Clock setting erased
Power has been interrupted or the power cord
46
has been
disconnected.
Reset the clock.
I cannot find the Bluetooth
name of this product on
my Bluetooth device
Ensure the Bluetooth function is activated on your Bluetooth
device.
Re-pair the product with your Bluetooth device.

Table of Contents

Related product manuals