35 GB/IE
AUX operation
Ensure that the product is connected to the
audio device.
Press SOURCE
7
or AUX
21
to select
AUX mode.
Operate your audio device directly for
playback features.
Press VOL +/–
2
/
43
to adjust the
volume to your desired level.
Bluetooth operation
You can listen to music from a Bluetooth-enabled
device via this product.
Pair Bluetooth-enabled
devices
The operational range between this product
and a Bluetooth device is approximately
8 metres (without any object between the
Bluetooth device and the product).
Before you connect a Bluetooth device to
this product, ensure you know the device’s
capabilities.
Compatibility with all Bluetooth devices is
not guaranteed.
Any obstacle between this product and a
Bluetooth device can reduce the operational
range.
If the signal strength is weak, your Bluetooth
receiver may disconnect, but it will re-enter
pairing mode automatically.
Press SOURCE
7
or BT
21
to select BT
(Bluetooth) mode. NO BT will show on the
display if the product is not paired to any
Bluetooth device.
Activate your Bluetooth device and select the
search mode. SBMS D30 B1 will appear
on your Bluetooth device. If you cannot find
the product, press PAIR
34
or press and
hold
15
. The product enters pairing
mode. The display shows PAIRING.
Select SBMS D30 B1 in the pairing list.
After successful pairing: The display shows
BT.
Play music from the connected device.
To disconnect the Bluetooth function,
you can:
Switch to another function on the product;
Disable the function from your Bluetooth
device. The Bluetooth device will be
disconnected from the product.
Press and hold
15
or PAIR
34
.
The Bluetooth device will be disconnected
from the product.
NOTES:
Enter 0000 for the password if necessary.
If a connection exist, press PAIR
34
or press
and hold
15
to re-activate the pairing
mode. The connection will be interrupted.
The display shows PAIRING.
If no other Bluetooth device pairs with
the product within 2 minutes, the product
recovers its previous connection.
The product also disconnects when your
device is moved beyond the operational
range.
If you want to reconnect your device to
the product, place it within the operational
range.
If the device is moved beyond the
operational range, when it is brought back,
check if the device is still connected to the
product.
If they are connected, BT is shown on the
display.
If the connection is lost, the display shows
NO BT. Follow the instructions of this
chapter to pair your device to the product
again.
Listen to music from
Bluetooth device
If the connected Bluetooth device supports
Advanced Audio Distribution Profile (A2DP),
you can listen to the music stored on the device
through the product.
If the device also supports Audio Video Remote
Control Profile (AVRCP), you can use the product‘s
remote control to play music stored on the device.
Pair your device with the product.
Play music via your device (if it supports
A2DP).
To Next Page
Loading...
