Silvercrest SBMS D30 B1 - FM operation; Auto scan and save preset stations; Tune to a preset radio station; Tuning in a station

36 GB/IE
 Use the supplied remote control to control
play (if it supports AVRCP).
Button Description
15
Press button to pause playback.
42
15
Press button to resume playback
42
/
29
Press button to skip to a track.
 FM operation
 Auto scan and save preset
stations
Fully unwind the FM aerial
48
. Place it in the
position that offers the best reception.
 Press SOURCE
7
or TUNER
21
to select
the FM mode.
 Press and hold PROG
44
to activate
automatic programming. All available
stations are programmed in an ascending
frequency sequence.
The first programmed radio station is played
automatically.
 Tune to a preset radio station
 Press ALBUM / PRESET / ,
27
to select
the desired preset number.
 Tuning in a station
 Press and hold /
27
. The frequency
changes down or up automatically until a
station is found.
 Press
/
27
repeatedly until you find
the desired station.
 If reception is poor, try to adjust the position
of the FM aerial
48
or try to move the
product to another location.
 Press briefly the
/
27
button to
change the frquency in 0,05 MHz steps.
 Presetting stations manually
You can preset up to 30 FM stations.
 Tune in the desired station. Press PROG
44
to confirm.
 Press ALBUM / PRESET /
/
27
to
select the preset number. Press PROG
44
to confirm.
 Repeat above steps for each station you
want to store in the memory with a preset
number.
 For better reception
 Fully unwind the FM aerial
48
. Place FM
aerial
48
in a position that offers the best
reception quality.
 Press ST / MONO
22
to toggle between
stereo and mono mode. This is helpful when
receiving poor signal reception.
 Scan Setting
 In the menu you can choose if you want
your radio to tune to Strong Stations Only or
select All Stations, and it will try to tune to all
stations, however some may be very weak.
 In FM mode, press MENU
30
button to
display the FM menu.
 Press the
/ button
27
to select
SCAN and then press the
button
15
to
confirm.
 Press the
/ button
27
to select
between STRONG and WEAK, and then
press the
button
15
to confirm.
 Audio Setting
 If you find that the station you are listening
to is not clear, you can select to listen to it in
MONO this can often clear up some of the
static.
 In FM mode, press MENU
30
button to
display the FM menu.
 Press the
/ button
27
to select
AUDIO and then press the
button
15
to
confirm.
 Press the
/ button
27
to select
between STEREO and MONO, and then
press the
button
15
to confirm.
 Showing RDS information
 If you tune to a RDS station, press
INFO
26
repeatedly to scroll through the
following information: Station Text / Station
Name / Program Type / RDS Clock.