SBTF 10 D4
GB
│
MT
│
71 ■
♦ Check whether the fuse of the car charger adapter
is defective and replace this if necessary (see section
“Changing the fuse in the car charger adapter”).
The hands-free set cannot be paired with a
mobile phone.
♦ Check whether the Bluetooth
®
function is activated
on your mobile phone.
♦ Check whether the hands-free set is switched on.
♦ If you use multiple mobile phones, ensure that there
are not more than two active connections with mobile
phones.
♦ Make sure that the hands-free set is no more than 10
metres from the mobile phone and that there are no
barriers or electronic devices between them.
♦ Reset the hands-free set to its factory settings, if neces-
sary (see section “Resetting the hands-free set”).
It is not clear whether the auto power function is
switched on or not.
♦ Press the
button for about 2 seconds and
check the operating/charging LED to see whether
the auto power function is switched on or not (see
section “Auto power function”).
The mobile phone does not connect automat-
ically even though the auto power function is
switched on.
♦ Depending on the mobile phone used, it is possible
that the automatic connection cannot be made. If this
happens, press the
button briefly to restore the
connection.
♦ With some mobile phones, the connection must also be
confirmed on the mobile phone itself. Please also refer
to the operating instructions for the respective mobile
phone.
To Next Page
Loading...
Need help?
General
