Silvercrest SBZBK 850 A1 - Before first use; Attaching accessories

11GB
 Before first use
 Remove all packaging material and lay out
all separate components in front of you. After
unpacking, check the product for visible
damage.
 Operation
 Accessories
Part Application
*
[]
Carpets
Hard floors
Stairs
[]
Carpets
Cushions
Upholstery
[]
Hard-to-reach places
Corners
Skirting edges
Louvres
Chairs
Upholstery
[]
Blinds
Louvres
Delicate surfaces
* Set the switch for hard floor/carpet
[]
according to the floor type:
Switch position Floor type
Hard floor
Carpet
 Attaching accessories
 Connect the hose [1] with the intake []. The
hose must audibly lock in place (Fig. B).
 Insert the handle of the hose
[1] into the
wide opening of the telescopic tube
[2]
(Fig. C).
 Set the telescopic tube
[2] to the desired
length:
– Slide the telescopic tube lock
[] forward
and adjust the length of the telescopic
tube
[2] (Fig. D).
– Release the telescopic tube lock
[].
– If necessary, slightly adjust the length until
the telescopic tube lock
[] locks in place.
 Insert the telescopic tube
[2] into the
intake of the nozzle
[] [] [] or furniture
brush
[] (Fig. E).
NOTES:
 The nozzles
[] [] [] and the furniture
brush
[] can be directly attached to the
hose
[1].
 Prior to usage: Ensure all accessories are
securely fastened.
 The nozzle holder
[] can be attached to the
telescopic tube
[2].
[]
[2]
[] []
[]