GB
│
MT │ 45 ■
SCUR 3 A1
Repeat function
You can use the repeat function to repeat a single track or the whole CD or the
programmed track sequence.
Repeat current track
♦ During CD playback press the REPEAT/RANDOM button once. "REP1"
appears on the display
and the current track will then be repeated.
Repeat entire CD
♦ During CD playback press the REPEAT/RANDOM button twice. "REP
ALL" appears on the display
and the entire CD or the programmed track
sequence is repeated.
Switching off repeat
♦ During CD playback press the REPEAT/RANDOM button twice until
"REP1"/"REP ALL" and "RAND" all disappear from the display
.
Random playback
During random play, all the tracks on a CD are played in a random order.
♦ During CD playback press the REPEAT/RANDOM button
three times.
"RAND" appears on the display
and random playback is activated.
♦ Press the REPEAT/RANDOM button
again to stop random play.
"RAND" disappears from the display
and the tracks are now played in
the normal order.
Programming a sequence of tracks
You can programme a playback sequence of up to 20 tracks while CD playback is
stopped. As soon as 20 tracks are programmed, "FU" appears on the display
.
♦ Press the CLOCK/MEMORY button
6. "MEMORY" flashes on the display
. The first programme position "P01" flashes briefly, followed by "00".
♦ Turn the −VOL+/ І◄◄ TUNE ►►І dial
to the left or right to select the
desired track.
♦ Press the CLOCK/MEMORY button
6 to store the selected track in the
first programme position "P01". The next programme position, "P02", flashes
briefly on the display
, followed by the last selected track.
♦ Turn the −VOL+/ І◄◄ TUNE ►►І dial
to the left or right to select the
next track. To store this track, press the CLOCK/MEMORY button
6 again.
Repeat this process until all the desired tracks have been programmed. The
same track can be saved in more than one programme space.
♦ Press the ►/II/SCAN/AMS button
as long as "MEMORY" is still on the
display
to start playback of the programmed sequence.
To Next Page
Loading...
