88 – EN
Then press the SELECT controller to select the desired duration.
While the set timer elapses, the battery symbol and the remain-
ing time <S10> flash alternately on the display.
17. Settings
System settings can only be adjusted when the device is switched on.
Proceed as follows to navigate in the menu and make settings:
First, select the operating mode you wish to configure, as described
above. Different settings can be configured depending on the se-
lected operating mode.
Press and hold the
MENU button until the menu is shown on the
display.
Press the
/ buttons or turn the controller to select a specific
menu or entry.
Press the controller button to open a specific menu or to confirm a
setting.
You can return to the previous menu by briefly pressing the
MENU
button again.
17.1. Overview of the menus in FM, DAB and
Bluetooth operating modes
The current setting is shown in the top right of the display, marked with
*.
To Next Page
Loading...
