To Next Page

To Previous Page

2. Place the drip grid14 on the drip

tray12 so that the small round hole is

over the float11.

9.3 Inserting/replacing the

filter

Your espresso machine comes with two fil-

ters:

Observe the following markings when in-

serting:

-Both filters1/2 have a notch21 in the

upper edge and a nub20 underneath.

The filter2 has a second nub on the op-

posite side so that it does not fall out of

the portafilter19.

- There is a notch18 in the edge of the

portafilter19.

1. Select the desired filter1 or2.

2. Insert the filter1/2 in an inclined man-

ner into the portafilter19 so that the

notch21 and the notch18 are on top

of each other. Press the filter down and

turn it a little in the portafilter so that it

cannot fall out.

NOTE: as the filter1 has only one nub20,

it can also be inserted straight into the por-

tafilter19.

To remove the filter

from the portafil-

ter

, turn the filter such that the two notch-

es

and

are on top of each other again.

The filter can be removed in this position.

9.4 Inserting/removing the

portafilter

Inserting:

1. Insert the portafilter19 with the handle

at the symbol 16.

2. Turn the handle of the portafilter19 to

the right as far as the symbol 15.

Filter for single

espresso2

Filter for double

espresso1

__368614_Espresso_Rosa_B5.book Seite 60 Dienstag, 2. Februar 2021 3:34 15

Brand	Silvercrest
Model	SEM 1050 A1
Category	Coffee Maker
Language	English

Silvercrest SEM 1050 A1 User Manual

Table of Contents

Questions and Answers:

Silvercrest SEM 1050 A1 Specifications

Related product manuals