47
GB
10. Cleaning and care
DANGER! Risk of electric shock!
~ Unplug the USB plug-in power unit|10 from the wall socket before
cleaning the hair and beard trimmer|4.
WARNING! Risk of injury!
~ Always switch the hair and beard trimmer|4 off before cleaning.
WARNING! Risk of material damage!
~ Do not use any astringent or abrasive cleaning agents.
NOTE: clean and oil the device after every use.
Hair and beard trimmer
• Wipe the casing of the hair and beard trimmer|4 with a damp
cloth.
Comb attachments
• Remove the comb attachments
|
1
,|
2
and|
14.
• Rinse the comb attachments
|
1
,|
2
and|
14 with water and let them
dry before reusing them.
Shaving head
1. Figure C: press the release button|12 to release the shaving
head|13.
2. Remove the shaving head|13 upwards.
3. Remove the hair remnants from the shaving head|13 by using the
supplied cleaning brush|23.
4. Clean the blades|3 of the shaving head|13 with water. Do not use
any other liquids. Let the shaving head|13 dry.
5. Apply a few drops of the supplied oil|22 to the blades|3 of the
shaving head|13 and spread it out evenly. Using a soft cloth, wipe
off the surplus oil, if necessary. Only use acid-free oil, such as e.g.
sewing machine oil.
__291948_Haarschneider_Autokamm_B8.book Seite 47 Mittwoch, 20. Dezember 2017 1:25 13
To Next Page
Loading...
