43
GB
Memory function
The device is equipped with a memory function.
- When the device is switched off, the last values selected regarding the
cutting length and the speed will be stored.
- When the device is switched on the next time, it will start with the val-
ues stored.
NOTE: the stored cutting length will not be set if the setting of the selector
switch|11 was changed.
Quick start
If you want to use the device with the last values selected for the cutting
length and the speed (e. g. because you put down the device only for a
few minutes), you can quick start it:
• Press the on/off switch|7 quickly three times.
6.5 Cutting length / comb attachments
WARNING! Risk of injury!
~ Switch off the device before pushing on or removing the comb at-
tachments|1,|2 or|14.
WARNING! Risk of material damage!
~ The mechanism for adjusting the cutting length of the comb attach-
ments has to be completely retracted when mounting or dismounting
a comb attachment|1,|2 or|14. If the device switches off automati-
cally, this occurs automatically.
With the hair and beard trimmer,|4 you can achieve cutting lengths be-
tween 1.5 mm and 41.0 mm.
__291948_Haarschneider_Autokamm_B8.book Seite 43 Dienstag, 19. Dezember 2017 7:42 19
To Next Page
Loading...
Need help?
General
