EasyManuals Logo

Silvercrest SKR 800 D1 User Manual

Silvercrest SKR 800 D1
Go to English
154 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background imageLoading...
Page #41 background image
SilverCrest SKR 800 D1
English - 39
8.16 AUX mode (external playback device)
You can use the AUX mode to connect, for example, a smartphone or MP3 player to the kitchen radio
and use it as a playback device. Your playback device must have an audio output (3.5 mm jack
connector).
Switch the kitchen radio off.
Adjust the volume of your playback device to the lowest setting.
Connect the audio cable [B] supplied to the AUX connector [2] and to the audio output of your
playback device. Please consult the technical documentation that came with your playback device.
Switch the kitchen radio on by briefly pressing the VOLUME button [14].
If the kitchen radio is not in AUX mode, press and hold the VOLUME button [14] for about 2 seconds
until "AUX" [30] is shown on the display [1].
Now start music playback from the source device. You have to control playback from your playback
device.
Adjust the volume using the volume adjustment on the playback device or using the VOLUME knob
[14] of the kitchen radio. The currently volume level set on the kitchen radio is shown on the display
[1].
Switch the kitchen radio off before disconnecting the audio cable [B].
8.17 Manual settings
The menu allows you to configure further settings. When switched off, press and hold the button [7]
for approx. 2 seconds to enter the menu. Turn the TIMER [5] control clockwise or anticlockwise to
navigate the menu. Press the button [7] briefly to confirm your selection. Adjust the settings promptly,
as any input is cancelled if no buttons are pressed for 15 seconds. Any settings changed up to that point
are automatically saved. Proceed as follows to change the settings:
When switched off, press and hold the button [7] for approx. 2 seconds.
"24H" (24 hour time format, default setting) or "12H" (12 hour time format) flashes on the display [1].
Turn the TIMER control [5] to switch between "24H" (24 hour time format) or "12H" (12 hour time
format). Press the button [7] to confirm your selection.
If you select the 12 hour format, the display [1] shows “PM” [40] before the time in the
afternoon.
The hour display flashes and you can now turn the TIMER control [5] to set the hour for the clock.
Press the button [7] briefly to apply the setting.
The minutes display flashes and you can now turn the TIMER control [5] to set the minutes for the
clock. Press the button [7] briefly to apply the setting.
The year display flashes and you can now turn the TIMER control [5] to set the year of the date. Press
the button [7] briefly to apply the setting.
The months display flashes and you can now turn the TIMER control [5] to set the months of the date.
Press the button [7] briefly to apply the setting.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Silvercrest SKR 800 D1 and is the answer not in the manual?

Silvercrest SKR 800 D1 Specifications

General IconGeneral
BrandSilvercrest
ModelSKR 800 D1
CategoryRadio
LanguageEnglish

Related product manuals