SLB 20 A1
■ 68
│
GB
│
MT
♦ Connect the USB type-A plug of the
USB charging cable r to a USB
power supply (5 V, at least 900 mA)
or a USB 3.0 port (can be recognised
by the blue USB socket) on your
computer.
♦ Connect the Micro USB plug of the
USB charging cable r to the Micro
USB connection INPUT
e on the
speaker.
The following table gives an approximate
indication of the speaker's charge level
using the four LEDs of battery charge
level display
1:
LED display
Charge
level
One LED is flashing < 5%
One LED is on 5–25%
Two LEDs are on 25–50%
Three LEDs are on 50–75%
Four LEDs are on 75–100%
IB_341802_SLB20A1_LB5.indb 68 19.05.2020 15:14:40
To Next Page
Loading...
