Silvercrest SLB 20 A1 - Switching off TWS mode

GB
│
MT
│
83 ■
SLB 20 A1
Switching off TWS mode
♦ Press the
button 7 on the left or
right speaker for about 3 seconds to
deactivate TWS mode. You will hear
a beep and the TWS LED 8
goes out on both speakers.
Playback is resumed via the left
speaker.
NOTE
♦ Press the
button 7 on the left
speaker for about 2 seconds to
reactivate the TWS mode.
Connecting external playback
devices (AUX mode)
In AUX mode, you can connect external
playback devices such as an MP3 player or
a smartphone to the speaker to use them as
the playback source for the speaker.
♦ Make sure that the speaker is switched
off.
♦ Connect the 3.5 mm jack cable
t to
the external playback device and the
AUX input
w on the speaker.
IB_341802_SLB20A1_LB5.indb 83 19.05.2020 15:14:40