Silvercrest SLB 20 A1 - Connecting external playback devices (AUX mode)

SLB 20 A1
■ 84
│
GB
│
MT
♦ Press and hold the button 2 for
about 2 seconds to switch the speaker
on. You will hear a beep and the
button
2 lights up orange.
♦ Start playback on the external play-
back device.
♦ Set the desired volume using the
button 6 or the button 4 on the
speaker. Alternatively, you can adjust
the volume on the external playback
device.
♦ Press the
button 5 if you want
to mute the speaker. Pressing the
button
5 again briefly will unmute
the speaker.
♦ To exit AUX mode, turn off the speaker
and remove the 3.5 mm jack cable
t
from the AUX input w on the speaker.
IB_341802_SLB20A1_LB5.indb 84 19.05.2020 15:14:41