Silvercrest SLB 20 A1 - Pairing the speaker with a Bluetooth device

GB
│
MT
│
71 ■
SLB 20 A1
♦
Press and hold the button 2
again for about 3 seconds to switch
the speaker off and deactivate the
Bluetooth
®
function. You will hear
a beep and the button 2 flashes
orange twice.
NOTE
► The speaker switches off automatically
after 15 minutes if there is no playback
and no buttons are pressed.
Pairing the speaker with
a Bluetooth
®
device
Before you can use the speaker for music
playback via Bluetooth
®
, you must pair
it with a compatible external Bluetooth
®
playback device.
♦ Press and hold the
button 2 for
about 3 seconds to switch the speaker
on and activate the Bluetooth
®
func-
tion. The button 2 flashes orange
twice and you will hear a beep. The
button 2 then flashes alternately
orange and blue.
IB_341802_SLB20A1_LB5.indb 71 19.05.2020 15:14:40