PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTIONS
"E03" appears on the
display 1 and you hear
beeps.
The microwave has switched
into fault protection due to
a short circuit or open-circuit
voltage.
Stop the programme and re-
move the power plug. If pos-
sible, eliminate the problem,
e.g. metals in the cooking
area, which can lead to the
above problem when using
the microwave function.
Otherwise, please contact
our Customer Support.
The light inside the micro-
wave is not working.
The light bulb is possibly
defective.
Contact the Customer Ser-
vice department.
RISK OF INJURY!
► Never try replace the light bulb yourself. Opening the appliance housing
could cause the release of microwave energy.
Disposal
Do not dispose of the appliance in your normal domestic waste.
This product is subject to the provisions of European Directive
2012/19/EU.
Dispose of the appliance via an approved waste disposal company or your
municipal waste disposal facility.
Please comply with all applicable regulations.
Please contact your waste disposal facility if you are in any doubt.
Your local community or municipal authorities can provide information on how to
dispose of the worn-out product.
Dispose of all packaging materials in an environmentally friendly manner.
Dispose of the packaging in an environmentally friendly manner.
Note the labelling on the packaging and separate the packaging material
components for disposal if necessary. The packaging material is labelled with
abbreviations (a) and numbers (b) with the following meanings:
1–7: Plastics, 20–22: Paper and cardboard, 80–98: Composites
To Next Page
Loading...
