Silvercrest SND 3600 A2 User Manual

Handling and operation
19
SND 3600 A2
GB
CY
♦
Slide the holder with the negatives and/or slides to be scanned
into the slot
3
on the device until it locks into place.
The scan motif will be displayed in the preview fi eld .
NOTICE
►
A holder that has been inserted into the device cannot be pulled
out again, it has to be pushed completely through the device.
♦ Adjust the holder, if required, until the scan motif is displayed
optimally in the preview window.
♦ If necessary, you can set the electrical balance (Balance), the
exposure (Exposure), the brightness (Brightness), the contrast
(Contrast) and the saturation (Saturation) by pressing on the
button
“Adjust”.
A settings window will be opened.
♦ Click on to increase the corresponding value and on to
decrease the corresponding value.
Use the slide controller to adjust the electrical balance (Colour
balance).
Example: If the image has a too high proportion of blue, this can be
reduced by increasing the yellow component.
IB_73761_SDN3600A2_LB7.indb 19IB_73761_SDN3600A2_LB7.indb 19 25.09.13 11:2725.09.13 11:27

Silvercrest SND 3600 A2 Specifications

General

Brand	Silvercrest
Model	SND 3600 A2
Category	Scanner
Language	English