EasyManua.ls Logo

Silvercrest SNM 33 B1 - Overlock Stitches; 3-Step Zig-Zag

Silvercrest SNM 33 B1
29 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
44
GB / IE
Overlock stitches
Stitch Stitch width Stitch length
E, F 3~5 S1, S2
Note:
Use new needles or ball point needles.
Seams, sewing and neatening visible hems.
For fine knits, jerseys, neck edges, borders.
For fine knits, jerseys, neck edges, borders.
For fine knits, handknits, seams.
All overlock stitches are suitable for sewing
and neatening edges and visible seams in
one operation.
When neatening, the needle should just go
over the edge of the fabric.
Overlock stitch (A)
Standard overlock stitch (B)
Double overlock stitch (C)
Sewing on lace and elastic, darning,
mending, reinforcing edges.
1. Place patch in position.
2. When mending tears, it is advisable to
use a piece of backing fabric as
reinforcement. First sew over the centre
and then just overlap on both sides.
Depending on the type of fabric and
damage, sew between 3 and 5 rows.
Stitch Stitch width Stitch length
C3~51~2
12
3-step zig-zag
Sewing basics
AB C

Related product manuals