How to correct irregular stitches on a Silvercrest Sewing Machine?
Irregular stitches on your Silvercrest Sewing Machine can be caused by incorrect thread tension; correct the thread tension. Alternatively, the thread might be trapped; check the course of the individual threads.
What to do if material is not cut off cleanly by Silvercrest SON 90 A1 Sewing Machine?
If the material isn't being cut off cleanly by your Silvercrest Sewing Machine, the blades may be blunt or improperly fitted. Exchange the blade or reinsert it correctly.
General| Brand | Silvercrest |
|---|---|
| Model | SON 90 A1 |
| Category | Sewing Machine |
| Language | English |
Explains how to move the upper blade for specific seam types or easier adjustment.
Discusses the types of needles compatible with the machine and their selection.
Describes the function and insertion of the upper looper element for specific stitches.
Guide on plugging in the foot pedal and connecting the machine to a power source.
How to adjust the sewing speed using the foot pedal.
Explains the safety feature that prevents operation with the front flap open.
Instructions for attaching the waste container to collect fabric scraps.
Instructions for correctly inserting new needles into the machine.
Guidance on the correct direction to turn the handwheel.
Essential safety precautions and general tips before starting the threading process.
Detailed steps for threading the red yarn through the upper looper.
How to adjust the stitch length for different fabric types and desired results.
Methods for determining the width of the seam by adjusting needle position.
Explains seam width based on using the right or left needle individually.
How the differential transport system works by using two sets of feed racks.
How to set the differential transport for creating gathered seams.
How to set the differential transport for creating stretched seams.
Specific settings and techniques for creating roll hems.
Guidelines for setting thread tensions for different stitch types and materials.
Specific settings for a 3-thread rolled hem, often using a bushy yarn.
How to perform a 3-thread rolled hem using the upper looper.
How to perform a 2-thread rolled hem using the lower looper.
How to use flatlock seams to join two pieces of fabric.
How to sew sharp outer corners with the overlock machine.
How to sew neat inner corners on fabric.
Best practices for using pins safely to avoid damaging the machine.
Method for securing loose thread chains to prevent unraveling.
How to strengthen seams using a reinforcing strip.
Instructions for creating decorative edgings using the machine.
Regular cleaning steps and lubrication points to maintain the machine.
Guide on how to safely replace the lower blade when it becomes dull.
To Next Page