Silvercrest SRD F1 B1 - FM Display Modes; Saving Stations Manually; Search Functions

13GB
 Press SELECT/SCAN [] to confirm.
 Press TUNE– [] or TUNE+ [] to set:
Menu item Function
Strong station Sets the product to search for stations with strong signal only.
All stations Sets the product to search for all stations.
 Press SELECT/SCAN [] to confirm.
 Search functions
Choose from 3 scanning functions to select a radio station.
Function Description
Auto scan
Press and hold TUNE– [] or TUNE+ [] to start scanning in
the desired direction.
Manual scan
Press TUNE– [] or TUNE+ [] briefly to search for FM stations
manually (each press changes the frequency by 0.05 MHz).
AMS
Press and hold SELECT/SCAN [] to automatically search for
stations and to save them in the 10 preset slots of the product.
The product starts at the lowest frequency. Depending on
reception, not all 10presets might be assigned. The automatic
scan will be stopped, if all 10preset slots are assigned.
 Saving stations manually
 After you have searched a station manually, press and hold PRESET/SET TIME [].
 Press TUNE– [] or TUNE+ [] to select a preset slot.
 Press SELECT/SCAN [] to confirm the selection.
 You can recall a previously saved station by pressing PRESET/SET TIME [].
 Press TUNE– [] or TUNE+ [] to select the desired station memory.
 Press SELECT/SCAN [] to confirm the selection.
 FM display modes
Press MENU/INFO [8] briefly to choose from:
Display Function
Signal strength only
Shows a bar indicating the signal strength.
No Radio Text
Will be displayed, if the radio station does not provide any
scrolling message giving real-time information, e.g song title,
news headlines, etc.
Program Type
Shows the genre of the programme that is being broadcasted.
Station name Shows the name of the station.
Audio info Shows if the station being received is in mono or stereo mode.