15GB
Deleting unavailable stations
Press and hold MENU/INFO [8].
Press TUNE– [] or TUNE+ [] to select <Prune>.
Press SELECT/SCAN [] to confirm.
Press TUNE– [] or TUNE+ [] to select <YES>.
Press SELECT/SCAN [] to confirm.
NOTE: Unavailable stations can only be detected after another complete search (e. g. at
a different location). In this case, the affected station is preceded by a question mark. After
the “Delete” function has been performed, the correspondingly marked stations are no
longer available in the station list.
DAB display modes
Press MENU/INFO [8] briefly to choose from:
Setting Function
No Radio Text
Will be displayed, if the radio station does not provide any
scrolling message giving real-time information, e.g song title,
news headlines, etc.
Signal strength only
Shows a bar indicating the signal strength.
Program Type
Shows the genre of the programme that is being broadcasted.
Station name Shows the name of the station.
Frequency Displays the frequency of the currently set station.
Signal error Displays the signal error of the currently set station.
Bitrate and Codec Displays the radio mode and the received audio bit rate.
Time
Displays the current time provided automatically by the
broadcaster.
Date
Displays the current date provided automatically by the
broadcaster.
Each time MENU/INFO [8] is pressed, the next item is displayed.
Presetting currently active station
You can store up to 20 stations (10 FM and 10 DAB).
Press and hold PRESET/SET TIME [].
<#:(Empty)> appears in the display [1].
Press TUNE– [] or TUNE+ [] to select a desired station memory.
Press SELECT/SCAN [] to confirm.
The station is stored. Preset # stored appears in the display [1].
NOTE: Station memories that are already occupied will be overwritten without further
notice.
To Next Page
Loading...
