Silvercrest SSMS 600 E3 - Removing the Food

13GB/IE/NI/CY
Examples for crushing and liquefying of various goods with the crushing set ([6] [7] [8]):
Food Max. Quantity Max. time Speed *
1
Onions 200 g 30 s 1 to 3
Parsley 30 g 30 s
Turbo
Garlic 20 cloves 30 s 1 to 5
Carrots
*
2
200 g 60 s 1 to 5
Almonds 200 g 60 s
Turbo
Walnut kernel 200 g 60 s 3 to 4
Parmesan
*
3
250 g 60 s
Turbo
*
1
see “Operation” section // *
2
Chunks (2 cm³) // *
3
Cubes (1 cm³)
 Put the container lid [6] on the drive unit [].
 Put the blades [7] on the central axis of the
container [8].
 Attach the lid [9] to the bottom of the
container [8] as anti-slippery coating.
 Give the food into the container [8].
 Close the container [8] with the container
lid[6].
 Connect the power plug [1] to a suitable
mains socket.
 Crush the food: Press and hold [4]. Use
TURBO [5], if needed.
 After use: Wait until the blades [7] have
come to a complete halt. Disconnect the
power plug [1] from the mains socket.
 Remove the container lid [6] from the
container [8]
.
 Remove the blades [7] out of the
container[8]
.
 If you wish to store the food in the
container[8]: Close the container with the
lid[9].
 Removing the food
 We recommend removing the food with a
suitable kitchen utensil (e.g. spatula, scraper).