11GB/IE/NI/CY
No action is needed from users
to shift the product between 50
and 60Hz. The product adapts
itself for both 50 and 60Hz.
Cleaning and storage
The drive unit [] and the whisk
holder [] shall not be exposed
to any dripping or splashing
water.
Refer to the “Cleaning and
care” section for instructions on
how to clean the product.
Before first use
Remove all the packaging materials.
Clean the product (see “Cleaning and care”).
Operation
Assembling accessories
(ill. B)
Put the desired accessory ([6]
[]
or
[]
) on
the drive unit
[]
.
on the accessory has to align with on
the drive unit.
Turn the accessory until aligns with .
Dismount all the accessories in reverse order.
Turning the product on/off
m
WARNING: The product has an initial
rotary impulse. Hold the product firmly during
operation.
The speed regulator [2] can be turned
steplessly to regulate the speed. Turn the
beam of the speed regulator to the desired
adjustment:
Speed regulator [2]
Speed scale [3]
(Highest) (Lowest)
Connect the power plug [1]
to a suitable
mains socket.
Press and
hold button
Setting
[4]
Speed according to speed
regulator [2]
setting
TURBO [5] Highest speed
Turning off the product: Release the pressed
button ([4] or [5]).
NOTES:
Let the product rest at least 2 minutes
between cycles (see Max. time in the
following table).
After 5 continuous operation cycles: Let the
product cool to the room temperature before
reusing it.
The speed can also be changed while the
product is operating.
To Next Page
Loading...
