Silvercrest SSTB 10 A1 User Manual

■ 32
│
GB
│
IE
SSTB 10 A1
Connecting a playback device using a cinch cable
♦ Connect the audio input jacks R and L on the rear of the device using
an audio cinch cable with the corresponding audio output sockets on the
external audio device. Make sure that the red and white colour markings
correspond.
♦ To switch on the device, press the
button ( or ).
♦ Press the FUNCTION button on the device or the AUX button on
the remote control repeatedly until $8; appears on the display .
♦ Switch on the connected playback device and start playback.
NOTE
► If both the AUX 1 socket
and the AUX 2 socket are connected to
external playback devices, the music will be played back via the AUX 1
socket by default. To use the AUX 2 socket , simply disconnect the
3.5 mm jack cable from the AUX 1 socket .
Pairing the device with a Bluetooth
®
playback device
To play audio files via Bluetooth
®
, the device must previously have been
paired with a compatible Bluetooth
®
playback device.
♦ Press the button ( or ) to switch the device on.
♦ Press the FUNCTION button
on the device repeatedly or the button
once to activate the Bluetooth
®
function. E/8( appears on the display
and the flashing
icon indicates that the device is ready for pairing.
♦ Set up the Bluetooth
®
playback device so that it searches for other
Bluetooth
®
devices. A detailed description of how to do this can be
found in the operating instructions for your Bluetooth
®
playback device.
♦ Select the entry SSTB 10 A1 from the list of found devices on your
Bluetooth
®
playback device and, if required, enter the code “0000”,
to connect the two devices. If the pairing is successful, you will hear a
signal and the icon appears on the display .

Silvercrest SSTB 10 A1 Specifications

General

Brand	Silvercrest
Model	SSTB 10 A1
Category	Speakers
Language	English