GB
│
IE
│
33 ■
SSTB 10 A1
NOTE
► The next time you turn on the device it will automatically connect to the last
Bluetooth
®
playback device connected. If your Bluetooth
®
playback
device does not automatically reconnect to the device, you will have to
re-establish the connection to your Bluetooth
®
playback device manu-
ally. A detailed description of how to do this can be found in the operating
instructions for your Bluetooth
®
playback device.
► If you use a smartphone as your Bluetooth
®
playback device, the audio
playback will be paused when there is an incoming call. Acceptance/termi-
nation of the call is carried out via the smartphone. After finishing the call,
the playback will be automatically continued.
► You can use keys
(
+
), ( + ) and ( + ) on the
device and on the remote control to operate the basic functions when play-
ing music in Bluetooth
®
operating mode.
► Note that while in Bluetooth
®
mode, you can also set the volume via the
Bluetooth
®
playback device.
► If the playback sounds distorted, reduce the volume on the Bluetooth
®
playback device.
► It is possible that no all functions will be supported depending on the
Bluetooth
®
player and operating system being used.
Troubleshooting
This section contains important information on fault identification and rectification. The fol-
lowing table will help to identify and rectify minor faults:
Fault Possible cause Remedy
The device will not
switch on.
The mains adapter is
not connected.
Connect the mains adapter correctly.
The socket is not supply-
ing any power.
Check the house's mains fuse.
No sound.
The volume on the device
or the playback device is
set to minimum.
Increase the volume on the device or
on the playback device.
Playback has not been
started on the playback
device.
Start playback on the playback
device.
You have selected the
incorrect operating
mode.
Check whether the correct operating
mode (AUX or Bluetooth
®
) has
been set.