Silvercrest SSVF 45 A1 - 4. Items Supplied; Unpacking Instructions; Operational Safety Precautions

7
GB
DANGER from rotating
parts!
~ Only operate the fan when all accesso-
ries are fully assembled. The protective
grids must be closed securely and un-
damaged.
~ Do not insert objects through the protec-
tive grids while the fan is running. Keep
long hair away from the rotating parts.
WARNING! Risk of material
damage!
~ Place the device on a stable, level sur-
face so that it cannot tip over.
~ Do not cover the device. Make sure
there is enough free space (at least
50cm) around the device.
~ Never place the device on hot surfaces
(e.g. hot plates) or near to heat sources
or open fire.
~ Only use the original accessories.
~ Do not clean using sharp objects or
abrasive cleaning agents.
4. Items supplied
1 control unit8 with fan motor7 and screw
ring4
1base14
1 pedestal13 with base plate15 and
L-shape screw16
1 rear protective grid5
1 front protective grid1
1 rotor blade3
1 cap nut2
1 connecting screw18
1nut17
1 remote control31 with battery inserted
1 copy of the user instructions
Unpacking
1. Remove all parts from the packaging.
2. If necessary, remove stickers and films
from the device and accessories. How-
ever, do not remove the rating plate un-
der any circumstances.
3. Check that all accessories are present
and undamaged.
__353132_2007_StandVentRC_B6.book Seite 7 Dienstag, 26. Januar 2021 1:26 13