Silvercrest STHL 2000 C3 - Remote Control; Changing the Battery in the Remote Control

9
GB
6. Remote control
The remote control18 is supplied with a
CR2025 (3V) battery inserted. Before
switching on, remove the plastic strip from
the remote control.
Changing the battery in the
remote control
DANGER!
~ There is a danger of explosion if the bat-
tery is not correctly replaced. Replace
only with the same or an equivalent
type.
1. Press the small lever
on the side of the bat-
tery compart-
ment23 gently in the
direction of the mid-
dle, and then pull the
battery compartment
out of the remote con-
trol18 in the direc-
tion of the arrow.
2. Replace the old bat-
tery with a new one.
The positive pole (+)
of the battery must be
pointing upwards.
3. Slide the battery com-
partment23 into the
remote control18.
__459215_2401_Turmheizluefter_B6.book Seite 9 Donnerstag, 13. Juni 2024 11:19 11