GB/IE/NI32
Press
13
or
MIN
12
and select the memory station (P01-P20)
which you would like to replace. Then press
15
to save the
station.
P Lighting
The display can be dimmed between 4 lighting levels (100%, 70%,
30%, OFF). Press
Snooze Brightness
14
to select the desired
lighting level.
P Power reserve
The power reserve is used to store data / settings if the product has
been accidentally disconnected from the power supply.
In the event of a power failure, the display will extinguish, the clock will
continue working, but there will be no alarm.
P Insert / change battery
The battery compartment
1
is located on the bottom of the product.
To open the battery compartment
1
use for example a coin. Turn the
lid clockwise and remove it. If necessary, remove the old button cell
battery. Insert a new button cell of type CR2032. Replace the lid and
turn it counterclockwise to close it.
To Next Page
Loading...
Need help?
General
