■ 54
│
GB
│
MT
SVEB 160 B2
Setting up and connecting
Requirements for the set-up location
For safe and trouble-free operation of the appliance, the set-up location must
fulfil the following requirements:
■ When setting up the appliance, place it on a firm, flat and horizontal
surface.
■ Do not operate the appliance in a hot, wet or extremely damp environment
or in the vicinity of flammable materials.
■ The mains power socket must be easily accessible, so that the power cable
can be easily disconnected in the event of an emergency.
Switching the appliance on/off
CAUTION – PROPERTY DAMAGE
► Before you plug in the appliance, compare the connection data (voltage
and frequency) on the rating plate with that of your mains power network.
This data must match to prevent damage to the appliance.
► Ensure that the power cable is undamaged and is not routed over hot
surfaces and/or sharp edges.
► Do not leave the mains cable hanging over any edges (tripping hazard).
♦ Insert the plug into the mains power socket.
♦ Press the
button r to switch on the appliance. The control lamp r
lights up.
♦ Press the
button r again to switch off the appliance. The control
lamp r switches off.
♦ Pull the plug from the socket if you do not plan to use the appliance for an
extended period and before cleaning it.
IB_367892_SVEB160B2_LB5.indb 54 30.06.2021 15:44:13
To Next Page
Loading...
