Silverline 196512 - Description of Symbols; Specification

GB
4
Maximum Operating Pressure: .............................6.3bar (90psi)
Air Consumption:.......................................170L/min (6cfm)
Air Inlet:...............................................¼" BSP, supplied
 withtwomaleairline
quick connectors .....................(EN-6 ‘UK’ and EQ-4 ‘European’ types)
Minimum hose diameter:....................................9.5mm (
3
⁄8")
No Load Speed: ............................................10,000min
-1
Disc Diameter: ......................................... 100 x 6 x 16mm
Spindle Size:......................................................M10
Weight..........................................................1.9kg
Noise and vibration information:
Level of sound pressure according to Machinery directive 2006/42/EC:
Sound Pressure............................................L
PA
= 83dB(A)
 SoundPower .............................................L
WA
= 94dB(A)
Uncertainty ................................................... K = 3dB
The sound intensity level for the operator may exceed 85dB(A) and sound protection
measures are necessary.
Vibration total values (triax vector sum) according to Machinery
directive 2006/42/EC:
Vibration emission value...................................ah = 1.34m/s
2
Uncertainty ................................................K = 1.5m/s
2
Aspartofourongoingproductdevelopment,specicationsof
Silverlineproductsmayalterwithoutnotice.
Technical Abbreviations Key
Specication
Noise and vibration
• SoundandvibrationlevelsinthespecicationaredeterminedaccordingtoISO28927-3.The
guresgivencanbeusedtocomparesimilartoolstestedtothisstandard.Theseguresmaybe
used to assess exposure to noise and vibration levels.
• Theguresrepresentnormaluseforthetoolinnormalworkingcondition.Apoorlymaintained,
incorrectly assembled or misused tool may produce increased levels of noise and vibration. The
totalworkingperiodthatyoucanoperatethistoolmustfactorinperiodswherethetoolisidleor
switchedoff.Allowfrequentrestbreakswhenoperatingthistool.
• It is in the interest of users to maximise their safety using the correct safety equipment, like ear
defenders that protect against loud or repetitive noise, and anti-vibration gloves that minimise
vibration.Donotoperatethetoolwithyourhandsbelowanormalcomfortabletemperature,as
vibrationwillhaveagreatereffect.
Sound
• Thenoisedirectivewasintroducedtoprotectagainsttherisktohealthandsafetyarisingor
likelytoarisefromexposuretonoiseandriskofhearing.TheDirectivecanbeusedtodene
noiseexposureandthephysicalparameters,suchaspeaksoundpressureanddailyandweekly
exposure level. Particular attention should be taken to exposure level and duration.
• For more information on the Noise Directives 2003/10/EC and 2000/14/EC, please visit The
EuropeanAgencyforSafetyandHealthatwork-www.osha.europa.eu.
Description of Symbols
Theratingplateonyourtoolmayshowsymbols.Theserepresentimportantinformationaboutthe
product or instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Wear head protection.
Wear hand protection.
Read instruction manual.
DONOTusewithcompressedgascylinders!
Conforms to relevant legislation and safety standards
Environmental Protection
Airtoolsshouldnotbedisposedofwithhouseholdwaste.Theycontaintracesof
oilandotherlubricants.Pleaserecyclewherefacilitiesexist.Checkwithyourlocal
authority or retailer for recycling advice.
n0 No load speed
n Rated speed
psi Pounds per square inch
Ø Diameter
/min or min
-1
Operations per minute
BSP British Standard Pipe (thread)
dB(A) Decibelsoundlevel(Aweighted)
Introduction
Thank you for purchasing this Silverline tool. This manual contains information necessary
for safe and effective operation of this product. This product has unique features and, even if
youarefamiliarwithsimilarproducts,itisnecessarytoreadthismanualcarefullytoensure
you fully understand the instructions. Ensure all users of the tool read and fully understand
this manual.
Original Instructions
196512_Manual.indd 4 30/08/2017 17:20