Silverline 196512 - Ce Declaration of Conformity

Air Angle Grinder 196512
9
silverlinetools.com
Terms & Conditions
Silverline Tools Guarantee
This Silverline product comes with a 3 year
guarantee
Registerthisproductatwww.silverlinetools.comwithin30daysofpurchaseinordertoqualify
for the 3 year guarantee. Guarantee period begins according to the date of purchase on your
sales receipt.
Registering your purchase
Registration is made at silverlinetools.com by selecting the Guarantee Registration button. You
willneedtoenter:-
• Your personal details
• Details of the product and purchase information
OncethisinformationisenteredyourguaranteecerticatewillbecreatedinPDFformatforyou
toprintoutandkeepwithyourpurchase.
Guarantee period becomes effective from the date of retail purchase as detailed on your sales
receipt.
PLEASE KEEP YOUR SALES RECEIPT
Ifthisproductdevelopsafaultwithin30daysofpurchase,returnittothestockistwhereit
waspurchased,withyourreceipt,statingdetailsofthefault.Youwillreceiveareplacement
or refund.
If this product develops a fault after the 30 day period, return it to:
Silverline Tools Service Centre
PO Box 2988
Yeovil
BA21 1WU, UK
The guarantee claim must be submitted during the guarantee period.
You must provide the original sales receipt indicating the purchase date, your name, address
andplaceofpurchasebeforeanyworkcanbe
carried out.
You must provide precise details of the fault requiring correction.
ClaimsmadewithintheguaranteeperiodwillbeveriedbySilverlineToolstoestablishifthe
decienciesarerelatedtomaterialormanufacturingoftheproduct.
Carriagewillnotberefunded.Itemsforreturnmustbeinasuitablycleanandsafestatefor
repair, and should be packaged carefully to prevent damage or injury during transportation. We
may reject unsuitable or
unsafe deliveries.
AllworkwillbecarriedoutbySilverlineToolsoritsauthorized
repair agents.
Therepairorreplacementoftheproductwillnotextendtheperiod
of guarantee
Defects recognised by us as being covered by the guarantee shall be corrected by means of
repairofthetool,freeofcharge(excludingcarriagecharges)orbyreplacementwithatoolin
perfectworkingorder.
Retainedtools,orparts,forwhichareplacementhasbeenissued,willbecomethepropertyof
Silverline Tools.
Therepairorreplacementofyourproductunderguaranteeprovidesbenetswhichare
additional to and do not affect your statutory rights as a consumer.
What is covered:
Therepairoftheproduct,ifitcanbeveriedtothesatisfactionofSilverlineToolsthatthe
deciencieswereduetofaultymaterialsorworkmanshipwithintheguaranteeperiod.
Ifanypartisnolongeravailableoroutofmanufacture,SilverlineToolswillreplaceitwitha
functional replacement part.
Use of this product in the EU.
What is not covered:
Silverline Tools does not guarantee repairs required as a result of:
Normalwearandtearcausedbyuseinaccordancewiththeoperatinginstructionsegblades,
brushes, belts, bulbs, batteries etc.
The replacement of any provided accessories drill bits, blades, sanding sheets, cutting discs and
other related items.
Accidental damage, faults caused by negligent use or care, misuse, neglect, careless operation
or handling of the product.
Use of the product for anything other than normal domestic purposes.
Changeormodicationoftheproductinanyway.
UseofpartsandaccessorieswhicharenotgenuineSilverlineToolscomponents.
Faulty installation (except installed by Silverline Tools).
Repairs or alterations carried out by parties other than Silverline Tools or its authorized repair
agents.
Claims other than the right to correction of faults on the tool named in these guarantee
conditions are not covered by the guarantee.
CE Declaration of Conformity
The undersigned: Mr Darrell Morris
as authorised by: Silverline Tools
Declares that
This declaration has been issued under the sole responsibility of the manufacturer.
TheobjectofthedeclarationisinconformitywiththerelevantUnionharmonisationLegislation.
Identication code: 196512
Description: Air Angle Grinder
Conforms to the following directives and standards:
• Machinery Directive 2006/42/EC
• EN792-7:2001+A1:2008
Notied body: Intertek Testing Services, Shanghai, China
The technical documentation is kept by: Silverline Tools
Date: 13/06/13
Signed:
Mr Darrell Morris
Managing Director
Name and address of the manufacturer:
PowerboxInternationalLimited,CompanyNo.06897059.Registeredaddress:
Powerbox,BoundaryWay,LuftonTradingEstate,Yeovil,SomersetBA228HZ,UnitedKingdom.
196512_Manual.indd 9 30/08/2017 17:20