Silverline 250482 - Description of Symbols

6
EN
Safety Instructions for Height Safety
Equipment
WARNING:Activitiesinvolvingtheuseofthisequipmentareinherently
dangerous.ALWAYScarryoutariskassessmentbeforeworkcommences,including
rescue arrangements.
WARNING: Specictrainingisessentialbeforeusingthisequipment.Itmust
onlybeusedbycompetentandresponsibleindividuals,takingcarenotexceeding
the limitations of the equipment.
WARNING:Failuretoadheretoanywarningsandrecommendationsgiven
intheseinstructions,mayresultinsevereinjuryorevendeath!Whenusingthis
equipmentyoupersonallyassumeallrisksandresponsibilitiesforalldamage,injury
ordeathwhichmayoccurduringorfollowingincorrectuseofthisequipment.Youare
responsibleforyourownactionsanddecisions.
If you are unable, or not in a position to assume this responsibility or to accept
these risks, DO NOT USE THIS EQUIPMENT.
a) NEVER use equipment that has exceeded its shelf and/or service life.
b) This product MUST NOT be stressed beyond its strength rating.
c) DO NOT use components of fall arrest gear outside its limitations, or for
applicationswhichtheywerenotspecicallydesignedfor.
d) Avoid impacts and rubbing against abrasive surfaces during use, transport
and storage.
e) DO NOT use connectors with manual locking mechanisms in areas where
they are frequently opened and closed.
f) Ensure locking mechanisms and safety devices engage securely and
connectors are fully closed and locked before use.
g) NEVER combine components that are not recommended by the
manufacturer as being compatible.Oneitemmayinterferewiththesafe
functionofanother,jeopardisingthefunctionofthesystemasawhole.
h) NEVER attach a fall arrest system to an anchorage if you are unsure about
the strength and condition of the anchorage.
i) Take into account the length of every single component of a fall arrest
system, including the connectors, when determining the total length of
the system.
j) Theclearanceundertheusermustbesufcienttopreventthemfrom
striking an obstacle in the event of a fall.
k) DO NOT allow any part of a fall arrest, work positioning or restraint system
to come into contact with sharp edges or abrasive surfaces during use.
Repositionifnecessaryorchooseanalternativeanchorage.
l) Any component of a fall arrest system must be individually inspected
according to the manufacturer’s recommendations and procedures. After
assembly,thesystemmust beinspectedasafunctionalunit.
m)AnykindofrepairormodicationofthisequipmentisstrictlyPROHIBITED.
n) DO NOT tie knots in harnesses, lanyards and ropes.DONOTallow
equipment to become tangled.
o) Equipment that has been exposed to extreme conditions, failed an
inspection or has been used to arrest a fall must be retired and destroyed.
Neverexposeitemsmadewithsyntheticbrecomponentstodirectames.
p) DO NOT use shock absorbers that have been partially deployed,orwhen
the plastic sheath is damaged.
q) Destroy retired equipment immediately, to prevent further use.
r) Allusersoffallarrestgearmustbemedicallytforactivitiesatheight
and must wear appropriate personal protective equipment for the
environment, work carried out and tools used.
s) Carry out a risk assessment for every activity,anddenearescueplanthat
canbesafelyandrapidlyexecutedincaseofemergency.
t) All product markings must remain intact and clearly legible for the entire
service life of this equipment.
u) Store the equipment with its dedicated service record and usage
instructions. Gearwithuncertainservicehistorymustberemovedfromservice
anddestroyed.
v) Before using this equipment, ensure that it complies with local federal
regulations and other applicable safety standards.
w) Textile products including webbing and ropes MUST NOT be marked using
ink from marker pens or paint, asthesesubstancesmaypotentiallyleadto
chemical damage of the material.
x) Store in accordance with the manufacturer’s instructions.
Specication
Model:………………………………….....................250482
Applicable standards:............... EN361:2002(FullBodyHarness),
BSEN365:2004(GeneralRequirements)
2016/425/EU
Purpose: ................................................Fall arrest
Material: ................................................ Polyester
Maximum strength: ..........................................16kN
Temperature range: ...................................-40 to +80°C
Attachment points: ....................EN361:Dorsal(A),Sternal(A/2)
Max.userweight: ..........................................140kg*
Netweight:................................................0.90kg
Aspartofourongoingproductdevelopment,specicationsofSilverlineproducts
may alter without notice.
*Theoperatormustbeabletoachieveasafeandcomfortablet,usingthe
adjustment options provided. The equipment must not be used if it cannot be adjusted to
ttheoperatorcomfortablyandsecurely.
Carefully read and understand these instructions and any label
attached to the tool before use. Keep these instructions with the product
for future reference. Ensure all persons who use this product are fully
acquainted with these instructions.
Introduction
ThankyouforpurchasingthisSilverlinetool.Thismanualcontainsinformationnecessary
forsafeandeffectiveoperationofthisproduct.Thisproducthasuniquefeaturesand,evenif
youarefamiliarwithsimilarproducts,itisnecessarytoreadthismanualcarefullytoensure
youfullyunderstandtheinstructions.Ensureallusersofthetoolreadandfullyunderstand
this manual.
Description of Symbols
Theratingplateonyourtoolmayshowsymbols.Theserepresentimportant
information about the product or instructions on its use
Wear hearing protection
Weareyeprotection
Wear breathing protection
Wear head protection
Read instruction manual
Caution!
Conformstorelevantlegislationandsafetystandards
Approvedbodynumber:CCQSUKLtd
Notiedbodynumber:CCQSCerticationServices
Limited
2834
1105